BDJC-20KV塑料擊穿強度測試儀

塑料擊穿強度測試儀滿足標準：

GB/T 1408-2006 絕緣材料電氣強度試驗方法

GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗

GB/T3333 電纜紙工頻電壓擊穿試驗方法

HG/T 3330絕緣漆漆膜擊穿強度測定法

GB12656 電容器紙工頻電壓擊穿試驗方法

ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.

塑料擊穿強度測試儀適用范圍及功能

主要適用于固體絕緣材料（如：塑料、橡膠、層壓材料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等絕緣材料及絕緣件）在工頻電壓或直流電壓下擊穿強度和耐電壓的測試。

本儀器由電腦控制，是我公司自主研發的全新第二代介電擊穿檢測儀器，本儀器由數字集成電路系統與軟件控制系統兩大部分構成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。可實時繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。

本系統能夠自動判別試樣擊穿并采集擊穿電壓數據及泄露電流，同時能夠在擊穿的瞬間電壓迅速降低自動歸零。軟件系統操作方便，性能穩定，安全可靠。

塑料擊穿強度測試儀軟件功能:

    01、軟件平臺：WINDOWS窗口操作平臺，界面直觀，便于操作

02、曲線顯示：在實驗過程中可以動態顯示試驗曲線

03、數據導出：可以對試驗結果導入EXCEL表格

04、實驗報告：可以人為設置報告名稱，并對實驗報告進行打印

05、試驗方式：可以根據需求對直流試驗和交流試驗進行靈活選擇

06、試驗方法：可以根據需求自行選擇擊穿電壓、耐壓試驗、梯度試驗

07、參數設置：可以根據不同的試驗方式及試驗方法靈活設置所需的不同參數值

08、試樣設置：可對不同標準的試樣參數靈活設置

09、人員管理：設置用戶名及密碼，不同的操作員登入進行不同的試驗，互不影響

10、標準選擇：含有不同標準，可根據需求自行選擇

11、連續操作：連續操作試驗時，可直接在軟件里結束試驗，進行二次試驗

塑料擊穿強度測試儀技術要求：

01、輸入電壓： 交流 220 V
02、輸出電壓： 交流 0--100 KV ; 
               直流 0—100 KV
03、電器容量： 5KVA
04、高壓分級： 0-10KV，0--20KV，0—30KV，0-50KV，0-100KV

05、升壓速率： 100V/S 200V/S 500 V/S 1000 V/S 2000V/S  5000V/S 等

              （備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）

06、試驗方式：
           直流試驗：1、勻速升壓  2、梯度升壓 3、耐壓試驗 
           交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗

07、試驗介質：空氣，試驗油
08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
09、采用先進智能集成電路勻速調壓。
10、支持短時間內短路試驗要求。
11、電壓試驗精度： ≤ 1％。
12、試驗電壓連續可調： 0--100 KV。

13、電流可采集到m*

14、電極規格：

1、片材電極 ￠25mm 兩個   片材電極 ￠75mm一個

                  2、漆包線電極        兩個

                  3、管用電極          兩個

    15、主機尺寸：長寬高-1800*800*1700（MM）

    16、操作臺尺寸：長寬高-1800*8700*700（MM）

    17、防護罩材質：有機玻璃

    18、油槽尺寸：長寬高-300*200*150

19、設備重量：約300KG
 

塑料擊穿強度測試儀安全保護：

 本儀器具有比較完善的安全防護措施：

本試驗儀器電路保護控制：

（1）超壓保護 （2）過流保護 （3）短路保護（4）漏電保護 （5）軟件誤操作保護

塑料擊穿強度測試儀試驗方式：

1、絕緣試樣空氣中試驗

2、絕緣試樣浸油中試驗

Meet the standard:
Test methods for electrical strength of 1408-2006 GB/T insulating materials
Test of power frequency voltage breakdown strength and voltage endurance of GB/T1695-2005 vulcanized rubber
Test method for power frequency voltage breakdown of GB/T3333 cable paper
Determination of breakdown strength of HG/T 3330 insulating paint film
Test method for power frequency voltage breakdown of GB12656 capacitor paper
Standard Test Method for dielectric breakdown voltage and dielectric strength of D149 ASTM solid electrical insulating materials at industrial power frequencies.
Applicable scope and function
Mainly used in solid insulating materials (such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulation materials and parts) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
The instrument is controlled by a computer, is my company independent research and development of a new second generation dielectric breakdown testing instrument, the instrument consists of a digital integrated circuit and software control system consists of two parts, pressure rate truly uniform, accurate, and can accuray measure the leakage current data. Can draw the test curve in real time, display the test data, judge accuray, and can save, analysis, print the test data.
The system can automatically determine the sample breakdown and collect breakdown voltage data and leakage current, while the breakdown of the instantaneous voltage quickly reduce the automatic return to zero. Software system is easy to operate, stable performance, safe and reliable.
Two, software function:
01, software platform: WINDOWS window operating platform, intuitive interface, easy to operate
02, the curve shows: in the experimental process can be dynamic display test curve
03, data export: the test results can be imported into the EXCEL table
04, the experimental report: you can set the name of the report, and the report of the experiment to print
05, test methods: according to the needs of the DC test and AC test for flexible selection
06, test methods: according to the demand to choose their own breakdown voltage, voltage test, gradient test
07, parameter setting: according to different test methods and test methods can be flexibly set the different parameters
08, sample setting: can be different standards of the sample parameters of flexible settings
09, personnel management: set the user name and password, different operators to log in for different tests, do not affect each other
10, the standard choice: contains different standards, according to the needs of their own choice
11, continuous operation: continuous operation of the test, can be directly in the software to end the test, the two test
Three, technical requirements:
01, input voltage: AC 220 V
02, output voltage: AC KV 0--100;
DC 0 - 100 KV
03, electrical capacity: 5KVA
04, high pressure classification: 0-10KV, 0--20KV, 0 - 30KV, 0-50KV, 0-100KV
05, boost speed: 200V/S 100V/S 500 V/S 1000 2000V/S 5000V/S V/S, etc.
(Note: to meet the requirements of the standard and can be based on user needs to set different boost rate)
06, test methods:
DC test: 1, uniform step up 2, gradient boost 3, pressure test
AC test: 1, uniform step up 2, gradient boost 3, pressure test
07, test medium: air, test oil
08, the installation of high sensitivity over current protection device to ensure that the sample breakdown in the 0.05S cut off the power supply.
09, the use of advanced inligent integrated circuit uniform pressure.
10, support short time short circuit test request.
11, voltage test accuracy: less than 1%.
12, the test voltage can be adjusted continuously: KV 0--100.
13, the current can be collected to the mA level
14, electrode specifications:
1, Phi 25mm two electrode sheet sheet electrode of a 75mm
2, enamel wire electrode two
3, tube electrode two
15, the host size: long and wide high -1800*800*1700 (MM)
16, operating table size: long and wide high -1800*8700*700 (MM)
17, protective cover material: white transparent organic glass
18, oil tank size: long and wide high -300*200*150
19, equipment weight: about 300KG
Four, safety protection:
The instrument has more perfect security measures:
Circuit protection and control of the test instrument:
(1) over voltage protection (2) over current protection (3) short circuit protection (4) leakage protection (5) software error operation protection
Five, test methods
1, insulation test specimens in the air
2, insulation test specimen immersed in